mycorerepository/Arduino Code/RGB_HotSpot.c

#include <ESP8266WiFi.h>

#include <WiFiClient.h>

#include <ESP8266WebServer.h>

const char *ssid = "ESP8266";

const char *password = "password";

const int Red = 14;
const int Green = 12;
const int Blue = 13;

ESP8266WebServer server(80);

void handleRoot() {

server.send(200, "text/html", "<h1>You are connected</h1>");

}

void setup() {

pinMode(Red, OUTPUT);
pinMode(Green, OUTPUT);
pinMode(Blue, OUTPUT);

delay(1000);


Serial.begin(115200);

Serial.println();

Serial.print("Configuring access point...");

WiFi.softAP(ssid, password);

IPAddress myIP = WiFi.softAPIP();

Serial.print("AP IP address: ");

Serial.println(myIP);

server.on("/", handleRoot);

server.on("/inline", [](){
    server.send(200, "text/plain", "this works as well");
  });

  server.on("/openRed", [](){
    server.send(200, "text/plain", "open red led");
    digitalWrite(Red, HIGH);
  });

  server.on("/closeRed", [](){
    server.send(200, "text/plain", "close red led");
    digitalWrite(Red, LOW);
  });

  server.on("/openGreen", [](){
    server.send(200, "text/plain", "open green led");
    digitalWrite(Green, HIGH);
  });

  server.on("/closeGreen", [](){
    server.send(200, "text/plain", "close green led");
    digitalWrite(Green, LOW);
  });

  server.on("/openBlue", [](){
    server.send(200, "text/plain", "open blue led");
    digitalWrite(Blue, HIGH);
  });

  server.on("/closeBlue", [](){
    server.send(200, "text/plain", "close blue led");
    digitalWrite(Blue, LOW);
  });

server.begin();

Serial.println("HTTP server started");


}

void loop() {

server.handleClient();

}