mirror of
https://bitbucket.org/myhomie/mycorerepository.git
synced 2025-12-06 09:41:19 +00:00
603 lines
18 KiB
C
603 lines
18 KiB
C
//******************************************************************************
|
|
// IRremote
|
|
// Version 2.0.1 June, 2015
|
|
// Copyright 2009 Ken Shirriff
|
|
// For details, see http://arcfn.com/2009/08/multi-protocol-infrared-remote-library.html
|
|
//
|
|
// Modified by Paul Stoffregen <paul@pjrc.com> to support other boards and timers
|
|
//
|
|
// Interrupt code based on NECIRrcv by Joe Knapp
|
|
// http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?num=1210243556
|
|
// Also influenced by http://zovirl.com/2008/11/12/building-a-universal-remote-with-an-arduino/
|
|
//
|
|
// JVC and Panasonic protocol added by Kristian Lauszus (Thanks to zenwheel and other people at the original blog post)
|
|
// Whynter A/C ARC-110WD added by Francesco Meschia
|
|
//******************************************************************************
|
|
|
|
#ifndef IRremoteint_h
|
|
#define IRremoteint_h
|
|
|
|
//------------------------------------------------------------------------------
|
|
// Include the right Arduino header
|
|
//
|
|
#if defined(ARDUINO) && (ARDUINO >= 100)
|
|
# include <Arduino.h>
|
|
#else
|
|
# if !defined(IRPRONTO)
|
|
# include <WProgram.h>
|
|
# endif
|
|
#endif
|
|
|
|
//------------------------------------------------------------------------------
|
|
// This handles definition and access to global variables
|
|
//
|
|
#ifdef IR_GLOBAL
|
|
# define EXTERN
|
|
#else
|
|
# define EXTERN extern
|
|
#endif
|
|
|
|
//------------------------------------------------------------------------------
|
|
// Information for the Interrupt Service Routine
|
|
//
|
|
#define RAWBUF 101 // Maximum length of raw duration buffer
|
|
|
|
typedef
|
|
struct {
|
|
// The fields are ordered to reduce memory over caused by struct-padding
|
|
uint8_t rcvstate; // State Machine state
|
|
uint8_t recvpin; // Pin connected to IR data from detector
|
|
uint8_t blinkpin;
|
|
uint8_t blinkflag; // true -> enable blinking of pin on IR processing
|
|
uint8_t rawlen; // counter of entries in rawbuf
|
|
unsigned int timer; // State timer, counts 50uS ticks.
|
|
unsigned int rawbuf[RAWBUF]; // raw data
|
|
uint8_t overflow; // Raw buffer overflow occurred
|
|
}
|
|
irparams_t;
|
|
|
|
// ISR State-Machine : Receiver States
|
|
#define STATE_IDLE 2
|
|
#define STATE_MARK 3
|
|
#define STATE_SPACE 4
|
|
#define STATE_STOP 5
|
|
#define STATE_OVERFLOW 6
|
|
|
|
// Allow all parts of the code access to the ISR data
|
|
// NB. The data can be changed by the ISR at any time, even mid-function
|
|
// Therefore we declare it as "volatile" to stop the compiler/CPU caching it
|
|
EXTERN volatile irparams_t irparams;
|
|
|
|
//------------------------------------------------------------------------------
|
|
// Defines for blinking the LED
|
|
//
|
|
|
|
#if defined(CORE_LED0_PIN)
|
|
# define BLINKLED CORE_LED0_PIN
|
|
# define BLINKLED_ON() (digitalWrite(CORE_LED0_PIN, HIGH))
|
|
# define BLINKLED_OFF() (digitalWrite(CORE_LED0_PIN, LOW))
|
|
|
|
#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
|
|
# define BLINKLED 13
|
|
# define BLINKLED_ON() (PORTB |= B10000000)
|
|
# define BLINKLED_OFF() (PORTB &= B01111111)
|
|
|
|
#elif defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644__)
|
|
# define BLINKLED 0
|
|
# define BLINKLED_ON() (PORTD |= B00000001)
|
|
# define BLINKLED_OFF() (PORTD &= B11111110)
|
|
|
|
#else
|
|
# define BLINKLED 13
|
|
#define BLINKLED_ON() (PORTB |= B00100000)
|
|
# define BLINKLED_OFF() (PORTB &= B11011111)
|
|
#endif
|
|
|
|
//------------------------------------------------------------------------------
|
|
// CPU Frequency
|
|
//
|
|
#ifdef F_CPU
|
|
# define SYSCLOCK F_CPU // main Arduino clock
|
|
#else
|
|
# define SYSCLOCK 16000000 // main Arduino clock
|
|
#endif
|
|
|
|
//------------------------------------------------------------------------------
|
|
// Defines for setting and clearing register bits
|
|
//
|
|
#ifndef cbi
|
|
# define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit))
|
|
#endif
|
|
|
|
#ifndef sbi
|
|
# define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit))
|
|
#endif
|
|
|
|
//------------------------------------------------------------------------------
|
|
// Pulse parms are ((X*50)-100) for the Mark and ((X*50)+100) for the Space.
|
|
// First MARK is the one after the long gap
|
|
// Pulse parameters in uSec
|
|
//
|
|
|
|
// Due to sensor lag, when received, Marks tend to be 100us too long and
|
|
// Spaces tend to be 100us too short
|
|
#define MARK_EXCESS 100
|
|
|
|
// microseconds per clock interrupt tick
|
|
#define USECPERTICK 50
|
|
|
|
// Upper and Lower percentage tolerances in measurements
|
|
#define TOLERANCE 25
|
|
#define LTOL (1.0 - (TOLERANCE/100.))
|
|
#define UTOL (1.0 + (TOLERANCE/100.))
|
|
|
|
// Minimum gap between IR transmissions
|
|
#define _GAP 5000
|
|
#define GAP_TICKS (_GAP/USECPERTICK)
|
|
|
|
#define TICKS_LOW(us) ((int)(((us)*LTOL/USECPERTICK)))
|
|
#define TICKS_HIGH(us) ((int)(((us)*UTOL/USECPERTICK + 1)))
|
|
|
|
//------------------------------------------------------------------------------
|
|
// IR detector output is active low
|
|
//
|
|
#define MARK 0
|
|
#define SPACE 1
|
|
|
|
//------------------------------------------------------------------------------
|
|
// Define which timer to use
|
|
//
|
|
// Uncomment the timer you wish to use on your board.
|
|
// If you are using another library which uses timer2, you have options to
|
|
// switch IRremote to use a different timer.
|
|
//
|
|
|
|
// Arduino Mega
|
|
#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
|
|
//#define IR_USE_TIMER1 // tx = pin 11
|
|
#define IR_USE_TIMER2 // tx = pin 9
|
|
//#define IR_USE_TIMER3 // tx = pin 5
|
|
//#define IR_USE_TIMER4 // tx = pin 6
|
|
//#define IR_USE_TIMER5 // tx = pin 46
|
|
|
|
// Teensy 1.0
|
|
#elif defined(__AVR_AT90USB162__)
|
|
#define IR_USE_TIMER1 // tx = pin 17
|
|
|
|
// Teensy 2.0
|
|
#elif defined(__AVR_ATmega32U4__)
|
|
//#define IR_USE_TIMER1 // tx = pin 14
|
|
//#define IR_USE_TIMER3 // tx = pin 9
|
|
#define IR_USE_TIMER4_HS // tx = pin 10
|
|
|
|
// Teensy 3.0 / Teensy 3.1
|
|
#elif defined(__MK20DX128__) || defined(__MK20DX256__)
|
|
#define IR_USE_TIMER_CMT // tx = pin 5
|
|
|
|
// Teensy-LC
|
|
#elif defined(__MKL26Z64__)
|
|
#define IR_USE_TIMER_TPM1 // tx = pin 16
|
|
|
|
// Teensy++ 1.0 & 2.0
|
|
#elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__)
|
|
//#define IR_USE_TIMER1 // tx = pin 25
|
|
#define IR_USE_TIMER2 // tx = pin 1
|
|
//#define IR_USE_TIMER3 // tx = pin 16
|
|
|
|
// Sanguino
|
|
#elif defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644__)
|
|
//#define IR_USE_TIMER1 // tx = pin 13
|
|
#define IR_USE_TIMER2 // tx = pin 14
|
|
|
|
// Atmega8
|
|
#elif defined(__AVR_ATmega8P__) || defined(__AVR_ATmega8__)
|
|
#define IR_USE_TIMER1 // tx = pin 9
|
|
|
|
// ATtiny84
|
|
#elif defined(__AVR_ATtiny84__)
|
|
#define IR_USE_TIMER1 // tx = pin 6
|
|
|
|
//ATtiny85
|
|
#elif defined(__AVR_ATtiny85__)
|
|
#define IR_USE_TIMER_TINY0 // tx = pin 1
|
|
|
|
// Arduino Duemilanove, Diecimila, LilyPad, Mini, Fio, Nano, etc
|
|
#else
|
|
//#define IR_USE_TIMER1 // tx = pin 9
|
|
#define IR_USE_TIMER2 // tx = pin 3
|
|
|
|
#endif
|
|
|
|
//------------------------------------------------------------------------------
|
|
// Defines for Timer
|
|
|
|
//---------------------------------------------------------
|
|
// Timer2 (8 bits)
|
|
//
|
|
#if defined(IR_USE_TIMER2)
|
|
|
|
#define TIMER_RESET
|
|
#define TIMER_ENABLE_PWM (TCCR2A |= _BV(COM2B1))
|
|
#define TIMER_DISABLE_PWM (TCCR2A &= ~(_BV(COM2B1)))
|
|
#define TIMER_ENABLE_INTR (TIMSK2 = _BV(OCIE2A))
|
|
#define TIMER_DISABLE_INTR (TIMSK2 = 0)
|
|
#define TIMER_INTR_NAME TIMER2_COMPA_vect
|
|
|
|
#define TIMER_CONFIG_KHZ(val) ({ \
|
|
const uint8_t pwmval = SYSCLOCK / 2000 / (val); \
|
|
TCCR2A = _BV(WGM20); \
|
|
TCCR2B = _BV(WGM22) | _BV(CS20); \
|
|
OCR2A = pwmval; \
|
|
OCR2B = pwmval / 3; \
|
|
})
|
|
|
|
#define TIMER_COUNT_TOP (SYSCLOCK * USECPERTICK / 1000000)
|
|
|
|
//-----------------
|
|
#if (TIMER_COUNT_TOP < 256)
|
|
# define TIMER_CONFIG_NORMAL() ({ \
|
|
TCCR2A = _BV(WGM21); \
|
|
TCCR2B = _BV(CS20); \
|
|
OCR2A = TIMER_COUNT_TOP; \
|
|
TCNT2 = 0; \
|
|
})
|
|
#else
|
|
# define TIMER_CONFIG_NORMAL() ({ \
|
|
TCCR2A = _BV(WGM21); \
|
|
TCCR2B = _BV(CS21); \
|
|
OCR2A = TIMER_COUNT_TOP / 8; \
|
|
TCNT2 = 0; \
|
|
})
|
|
#endif
|
|
|
|
//-----------------
|
|
#if defined(CORE_OC2B_PIN)
|
|
# define TIMER_PWM_PIN CORE_OC2B_PIN // Teensy
|
|
#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
|
|
# define TIMER_PWM_PIN 9 // Arduino Mega
|
|
#elif defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644__)
|
|
# define TIMER_PWM_PIN 14 // Sanguino
|
|
#else
|
|
# define TIMER_PWM_PIN 3 // Arduino Duemilanove, Diecimila, LilyPad, etc
|
|
#endif
|
|
|
|
//---------------------------------------------------------
|
|
// Timer1 (16 bits)
|
|
//
|
|
#elif defined(IR_USE_TIMER1)
|
|
|
|
#define TIMER_RESET
|
|
#define TIMER_ENABLE_PWM (TCCR1A |= _BV(COM1A1))
|
|
#define TIMER_DISABLE_PWM (TCCR1A &= ~(_BV(COM1A1)))
|
|
|
|
//-----------------
|
|
#if defined(__AVR_ATmega8P__) || defined(__AVR_ATmega8__)
|
|
# define TIMER_ENABLE_INTR (TIMSK |= _BV(OCIE1A))
|
|
# define TIMER_DISABLE_INTR (TIMSK &= ~_BV(OCIE1A))
|
|
#else
|
|
# define TIMER_ENABLE_INTR (TIMSK1 = _BV(OCIE1A))
|
|
# define TIMER_DISABLE_INTR (TIMSK1 = 0)
|
|
#endif
|
|
|
|
//-----------------
|
|
#define TIMER_INTR_NAME TIMER1_COMPA_vect
|
|
|
|
#define TIMER_CONFIG_KHZ(val) ({ \
|
|
const uint16_t pwmval = SYSCLOCK / 2000 / (val); \
|
|
TCCR1A = _BV(WGM11); \
|
|
TCCR1B = _BV(WGM13) | _BV(CS10); \
|
|
ICR1 = pwmval; \
|
|
OCR1A = pwmval / 3; \
|
|
})
|
|
|
|
#define TIMER_CONFIG_NORMAL() ({ \
|
|
TCCR1A = 0; \
|
|
TCCR1B = _BV(WGM12) | _BV(CS10); \
|
|
OCR1A = SYSCLOCK * USECPERTICK / 1000000; \
|
|
TCNT1 = 0; \
|
|
})
|
|
|
|
//-----------------
|
|
#if defined(CORE_OC1A_PIN)
|
|
# define TIMER_PWM_PIN CORE_OC1A_PIN // Teensy
|
|
#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
|
|
# define TIMER_PWM_PIN 11 // Arduino Mega
|
|
#elif defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644__)
|
|
# define TIMER_PWM_PIN 13 // Sanguino
|
|
#elif defined(__AVR_ATtiny84__)
|
|
# define TIMER_PWM_PIN 6
|
|
#else
|
|
# define TIMER_PWM_PIN 9 // Arduino Duemilanove, Diecimila, LilyPad, etc
|
|
#endif
|
|
|
|
//---------------------------------------------------------
|
|
// Timer3 (16 bits)
|
|
//
|
|
#elif defined(IR_USE_TIMER3)
|
|
|
|
#define TIMER_RESET
|
|
#define TIMER_ENABLE_PWM (TCCR3A |= _BV(COM3A1))
|
|
#define TIMER_DISABLE_PWM (TCCR3A &= ~(_BV(COM3A1)))
|
|
#define TIMER_ENABLE_INTR (TIMSK3 = _BV(OCIE3A))
|
|
#define TIMER_DISABLE_INTR (TIMSK3 = 0)
|
|
#define TIMER_INTR_NAME TIMER3_COMPA_vect
|
|
|
|
#define TIMER_CONFIG_KHZ(val) ({ \
|
|
const uint16_t pwmval = SYSCLOCK / 2000 / (val); \
|
|
TCCR3A = _BV(WGM31); \
|
|
TCCR3B = _BV(WGM33) | _BV(CS30); \
|
|
ICR3 = pwmval; \
|
|
OCR3A = pwmval / 3; \
|
|
})
|
|
|
|
#define TIMER_CONFIG_NORMAL() ({ \
|
|
TCCR3A = 0; \
|
|
TCCR3B = _BV(WGM32) | _BV(CS30); \
|
|
OCR3A = SYSCLOCK * USECPERTICK / 1000000; \
|
|
TCNT3 = 0; \
|
|
})
|
|
|
|
//-----------------
|
|
#if defined(CORE_OC3A_PIN)
|
|
# define TIMER_PWM_PIN CORE_OC3A_PIN // Teensy
|
|
#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
|
|
# define TIMER_PWM_PIN 5 // Arduino Mega
|
|
#else
|
|
# error "Please add OC3A pin number here\n"
|
|
#endif
|
|
|
|
//---------------------------------------------------------
|
|
// Timer4 (10 bits, high speed option)
|
|
//
|
|
#elif defined(IR_USE_TIMER4_HS)
|
|
|
|
#define TIMER_RESET
|
|
#define TIMER_ENABLE_PWM (TCCR4A |= _BV(COM4A1))
|
|
#define TIMER_DISABLE_PWM (TCCR4A &= ~(_BV(COM4A1)))
|
|
#define TIMER_ENABLE_INTR (TIMSK4 = _BV(TOIE4))
|
|
#define TIMER_DISABLE_INTR (TIMSK4 = 0)
|
|
#define TIMER_INTR_NAME TIMER4_OVF_vect
|
|
|
|
#define TIMER_CONFIG_KHZ(val) ({ \
|
|
const uint16_t pwmval = SYSCLOCK / 2000 / (val); \
|
|
TCCR4A = (1<<PWM4A); \
|
|
TCCR4B = _BV(CS40); \
|
|
TCCR4C = 0; \
|
|
TCCR4D = (1<<WGM40); \
|
|
TCCR4E = 0; \
|
|
TC4H = pwmval >> 8; \
|
|
OCR4C = pwmval; \
|
|
TC4H = (pwmval / 3) >> 8; \
|
|
OCR4A = (pwmval / 3) & 255; \
|
|
})
|
|
|
|
#define TIMER_CONFIG_NORMAL() ({ \
|
|
TCCR4A = 0; \
|
|
TCCR4B = _BV(CS40); \
|
|
TCCR4C = 0; \
|
|
TCCR4D = 0; \
|
|
TCCR4E = 0; \
|
|
TC4H = (SYSCLOCK * USECPERTICK / 1000000) >> 8; \
|
|
OCR4C = (SYSCLOCK * USECPERTICK / 1000000) & 255; \
|
|
TC4H = 0; \
|
|
TCNT4 = 0; \
|
|
})
|
|
|
|
//-----------------
|
|
#if defined(CORE_OC4A_PIN)
|
|
# define TIMER_PWM_PIN CORE_OC4A_PIN // Teensy
|
|
#elif defined(__AVR_ATmega32U4__)
|
|
# define TIMER_PWM_PIN 13 // Leonardo
|
|
#else
|
|
# error "Please add OC4A pin number here\n"
|
|
#endif
|
|
|
|
//---------------------------------------------------------
|
|
// Timer4 (16 bits)
|
|
//
|
|
#elif defined(IR_USE_TIMER4)
|
|
|
|
#define TIMER_RESET
|
|
#define TIMER_ENABLE_PWM (TCCR4A |= _BV(COM4A1))
|
|
#define TIMER_DISABLE_PWM (TCCR4A &= ~(_BV(COM4A1)))
|
|
#define TIMER_ENABLE_INTR (TIMSK4 = _BV(OCIE4A))
|
|
#define TIMER_DISABLE_INTR (TIMSK4 = 0)
|
|
#define TIMER_INTR_NAME TIMER4_COMPA_vect
|
|
|
|
#define TIMER_CONFIG_KHZ(val) ({ \
|
|
const uint16_t pwmval = SYSCLOCK / 2000 / (val); \
|
|
TCCR4A = _BV(WGM41); \
|
|
TCCR4B = _BV(WGM43) | _BV(CS40); \
|
|
ICR4 = pwmval; \
|
|
OCR4A = pwmval / 3; \
|
|
})
|
|
|
|
#define TIMER_CONFIG_NORMAL() ({ \
|
|
TCCR4A = 0; \
|
|
TCCR4B = _BV(WGM42) | _BV(CS40); \
|
|
OCR4A = SYSCLOCK * USECPERTICK / 1000000; \
|
|
TCNT4 = 0; \
|
|
})
|
|
|
|
//-----------------
|
|
#if defined(CORE_OC4A_PIN)
|
|
# define TIMER_PWM_PIN CORE_OC4A_PIN
|
|
#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
|
|
# define TIMER_PWM_PIN 6 // Arduino Mega
|
|
#else
|
|
# error "Please add OC4A pin number here\n"
|
|
#endif
|
|
|
|
//---------------------------------------------------------
|
|
// Timer5 (16 bits)
|
|
//
|
|
#elif defined(IR_USE_TIMER5)
|
|
|
|
#define TIMER_RESET
|
|
#define TIMER_ENABLE_PWM (TCCR5A |= _BV(COM5A1))
|
|
#define TIMER_DISABLE_PWM (TCCR5A &= ~(_BV(COM5A1)))
|
|
#define TIMER_ENABLE_INTR (TIMSK5 = _BV(OCIE5A))
|
|
#define TIMER_DISABLE_INTR (TIMSK5 = 0)
|
|
#define TIMER_INTR_NAME TIMER5_COMPA_vect
|
|
|
|
#define TIMER_CONFIG_KHZ(val) ({ \
|
|
const uint16_t pwmval = SYSCLOCK / 2000 / (val); \
|
|
TCCR5A = _BV(WGM51); \
|
|
TCCR5B = _BV(WGM53) | _BV(CS50); \
|
|
ICR5 = pwmval; \
|
|
OCR5A = pwmval / 3; \
|
|
})
|
|
|
|
#define TIMER_CONFIG_NORMAL() ({ \
|
|
TCCR5A = 0; \
|
|
TCCR5B = _BV(WGM52) | _BV(CS50); \
|
|
OCR5A = SYSCLOCK * USECPERTICK / 1000000; \
|
|
TCNT5 = 0; \
|
|
})
|
|
|
|
//-----------------
|
|
#if defined(CORE_OC5A_PIN)
|
|
# define TIMER_PWM_PIN CORE_OC5A_PIN
|
|
#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
|
|
# define TIMER_PWM_PIN 46 // Arduino Mega
|
|
#else
|
|
# error "Please add OC5A pin number here\n"
|
|
#endif
|
|
|
|
//---------------------------------------------------------
|
|
// Special carrier modulator timer
|
|
//
|
|
#elif defined(IR_USE_TIMER_CMT)
|
|
|
|
#define TIMER_RESET ({ \
|
|
uint8_t tmp = CMT_MSC; \
|
|
CMT_CMD2 = 30; \
|
|
})
|
|
|
|
#define TIMER_ENABLE_PWM do { \
|
|
CORE_PIN5_CONFIG = PORT_PCR_MUX(2) | PORT_PCR_DSE | PORT_PCR_SRE; \
|
|
} while(0)
|
|
|
|
#define TIMER_DISABLE_PWM do { \
|
|
CORE_PIN5_CONFIG = PORT_PCR_MUX(1) | PORT_PCR_DSE | PORT_PCR_SRE; \
|
|
} while(0)
|
|
|
|
#define TIMER_ENABLE_INTR NVIC_ENABLE_IRQ(IRQ_CMT)
|
|
#define TIMER_DISABLE_INTR NVIC_DISABLE_IRQ(IRQ_CMT)
|
|
#define TIMER_INTR_NAME cmt_isr
|
|
|
|
//-----------------
|
|
#ifdef ISR
|
|
# undef ISR
|
|
#endif
|
|
#define ISR(f) void f(void)
|
|
|
|
//-----------------
|
|
#if (F_BUS == 48000000)
|
|
# define CMT_PPS_VAL 5
|
|
#else
|
|
# define CMT_PPS_VAL 2
|
|
#endif
|
|
|
|
//-----------------
|
|
#define TIMER_CONFIG_KHZ(val) ({ \
|
|
SIM_SCGC4 |= SIM_SCGC4_CMT; \
|
|
SIM_SOPT2 |= SIM_SOPT2_PTD7PAD; \
|
|
CMT_PPS = CMT_PPS_VAL; \
|
|
CMT_CGH1 = 2667 / val; \
|
|
CMT_CGL1 = 5333 / val; \
|
|
CMT_CMD1 = 0; \
|
|
CMT_CMD2 = 30; \
|
|
CMT_CMD3 = 0; \
|
|
CMT_CMD4 = 0; \
|
|
CMT_OC = 0x60; \
|
|
CMT_MSC = 0x01; \
|
|
})
|
|
|
|
#define TIMER_CONFIG_NORMAL() ({ \
|
|
SIM_SCGC4 |= SIM_SCGC4_CMT; \
|
|
CMT_PPS = CMT_PPS_VAL; \
|
|
CMT_CGH1 = 1; \
|
|
CMT_CGL1 = 1; \
|
|
CMT_CMD1 = 0; \
|
|
CMT_CMD2 = 30 \
|
|
CMT_CMD3 = 0; \
|
|
CMT_CMD4 = 19; \
|
|
CMT_OC = 0; \
|
|
CMT_MSC = 0x03; \
|
|
})
|
|
|
|
#define TIMER_PWM_PIN 5
|
|
|
|
// defines for TPM1 timer on Teensy-LC
|
|
#elif defined(IR_USE_TIMER_TPM1)
|
|
#define TIMER_RESET FTM1_SC |= FTM_SC_TOF;
|
|
#define TIMER_ENABLE_PWM CORE_PIN16_CONFIG = PORT_PCR_MUX(3)|PORT_PCR_DSE|PORT_PCR_SRE
|
|
#define TIMER_DISABLE_PWM CORE_PIN16_CONFIG = PORT_PCR_MUX(1)|PORT_PCR_SRE
|
|
#define TIMER_ENABLE_INTR NVIC_ENABLE_IRQ(IRQ_FTM1)
|
|
#define TIMER_DISABLE_INTR NVIC_DISABLE_IRQ(IRQ_FTM1)
|
|
#define TIMER_INTR_NAME ftm1_isr
|
|
#ifdef ISR
|
|
#undef ISR
|
|
#endif
|
|
#define ISR(f) void f(void)
|
|
#define TIMER_CONFIG_KHZ(val) ({ \
|
|
SIM_SCGC6 |= SIM_SCGC6_TPM1; \
|
|
FTM1_SC = 0; \
|
|
FTM1_CNT = 0; \
|
|
FTM1_MOD = (F_PLL/2000) / val - 1; \
|
|
FTM1_C0V = (F_PLL/6000) / val - 1; \
|
|
FTM1_SC = FTM_SC_CLKS(1) | FTM_SC_PS(0); \
|
|
})
|
|
#define TIMER_CONFIG_NORMAL() ({ \
|
|
SIM_SCGC6 |= SIM_SCGC6_TPM1; \
|
|
FTM1_SC = 0; \
|
|
FTM1_CNT = 0; \
|
|
FTM1_MOD = (F_PLL/40000) - 1; \
|
|
FTM1_C0V = 0; \
|
|
FTM1_SC = FTM_SC_CLKS(1) | FTM_SC_PS(0) | FTM_SC_TOF | FTM_SC_TOIE; \
|
|
})
|
|
#define TIMER_PWM_PIN 16
|
|
|
|
// defines for timer_tiny0 (8 bits)
|
|
#elif defined(IR_USE_TIMER_TINY0)
|
|
#define TIMER_RESET
|
|
#define TIMER_ENABLE_PWM (TCCR0A |= _BV(COM0B1))
|
|
#define TIMER_DISABLE_PWM (TCCR0A &= ~(_BV(COM0B1)))
|
|
#define TIMER_ENABLE_INTR (TIMSK |= _BV(OCIE0A))
|
|
#define TIMER_DISABLE_INTR (TIMSK &= ~(_BV(OCIE0A)))
|
|
#define TIMER_INTR_NAME TIMER0_COMPA_vect
|
|
#define TIMER_CONFIG_KHZ(val) ({ \
|
|
const uint8_t pwmval = SYSCLOCK / 2000 / (val); \
|
|
TCCR0A = _BV(WGM00); \
|
|
TCCR0B = _BV(WGM02) | _BV(CS00); \
|
|
OCR0A = pwmval; \
|
|
OCR0B = pwmval / 3; \
|
|
})
|
|
#define TIMER_COUNT_TOP (SYSCLOCK * USECPERTICK / 1000000)
|
|
#if (TIMER_COUNT_TOP < 256)
|
|
#define TIMER_CONFIG_NORMAL() ({ \
|
|
TCCR0A = _BV(WGM01); \
|
|
TCCR0B = _BV(CS00); \
|
|
OCR0A = TIMER_COUNT_TOP; \
|
|
TCNT0 = 0; \
|
|
})
|
|
#else
|
|
#define TIMER_CONFIG_NORMAL() ({ \
|
|
TCCR0A = _BV(WGM01); \
|
|
TCCR0B = _BV(CS01); \
|
|
OCR0A = TIMER_COUNT_TOP / 8; \
|
|
TCNT0 = 0; \
|
|
})
|
|
#endif
|
|
|
|
#define TIMER_PWM_PIN 1 /* ATtiny85 */
|
|
|
|
//---------------------------------------------------------
|
|
// Unknown Timer
|
|
//
|
|
#else
|
|
# error "Internal code configuration error, no known IR_USE_TIMER# defined\n"
|
|
#endif
|
|
#endif
|